Cost-effective All-In-Light fiber laser

First presented at the LASER World of Photonics in Munich, the All-In-Light fiber laser was a cost-effective and reliable optical solution for many visitors. With up to 4 kW output power and sophisticated cutting head technology, it enables nitrogen cutting of stainless steel or aluminum with a thickness of more than 20 mm and flame cutting of mild steel with up to 25 mm.

Thanks to the possibility of using warm water cooling, condensation effects are prevented in both the fiber laser and the cutting head. In addition, the fiber laser offers a low-power mode for non-additive and non-ablation marking using annealing colors. The new and patented fiber connector concept with optimized cooling and internal laser monitoring eliminates sensitivity to back reflections. The minimized differences in beam quality from one laser to another ensure that your cutting parameters are suitable for all lasers of the same type.

The dust-tight construction of the LightCutter 2.0 or ProCutter 2.0 cutting heads guarantees outstanding robustness and functionality when cutting flat sheet metal. The LightCutter 2.0 Motorized 3D extends this performance into the medium power range with complex cuts on tubes, profiles and freeform surfaces up to 45° bevel cutting contours.

This complete optical solution combines the 25 years of Precitec cutting head technology with more than 30 years of TRUMPF fiber lasers and process fiber experience.

Lasermaterialbearbeitung Der neue All In Light Faserlaser

D'autres thèmes interessants

Titanium star flange with 3D printing for aerospace

Titanium star flange for the aerospace industry

The aerospace industry is one of the leading industries in the use of additive manufacturing. Lightweight and freedom of construction, lead time and…

Plus d’informations

Multilayer Glass Measurement

Sharp imaging in head-up display (HUD) for automotive glass.

Would your laminated glass pass the eye test? 

The demand for high-precision multilayer thickness measurements for laminated glass is growing.…

Plus d’informations

open trainings

Become an expert - new training sessions

The next appointments for our open ProCutter training courses are scheduled for September and October. These will be held in Gaggenau, Germany with a…

Plus d’informations

New Website

Our new website is online

We are very pleased to welcome you to our new homepage.

After optical, technical and above all contentwise revision, the website is now launched –…

Plus d’informations

Lasermaterialbearbeitung Unsere Preistraeger bringen Licht ins Dunkel

Innovation is our business - then and now

The ICALEO 2019 took place in October in Orlando, USA. It is one of the most important international conferences in the field of laser material…

Plus d’informations

Lasermaterialbearbeitung Gemeinsames Automotive OPEN HOUSE

Automotive OPEN HOUSE @ Blackbird supported by Precitec

On the last evening of the LASER World of Photonics, the joint open house of Blackbird Robotersysteme GmbH and Precitec GmbH & Co. KG opened its doors…

Plus d’informations

Lasermaterialbearbeitung LASER World of Photonics

LASER World of Photonics 2019

In the week from June 24th to June 27th 2019 the LASER World of Photonics took place in Munich. Precitec was present with a booth as well. The focus…

Plus d’informations

Lasermaterialbearbeitung Laserschweissloesungen fuer die E Mobilitaet

Laser Welding Solutions for E-Mobility

With the increased demand for electric motors and battery cells there is a rising need for laser welding solutions of copper and aluminum as well as…

Plus d’informations

Lasermaterialbearbeitung Laserauftragschweissen LMD und 3D Druck

Laser Metal Deposition and 3D Printing

As the catchphrase “3D printing” has found its way into business circles and the related press the innovative steps with respect to the use of a laser…

Plus d’informations

Lasermaterialbearbeitung Dicke Stahl Aluminium Schweissverbidnungen auch im Schiffbau

Thick steel-aluminum welded joints also in shipbuilding

The use of mixed compounds in shipbuilding is complex and cost-intensive. Therefore, a laser welding process with welding depth measurement was…

Plus d’informations

Nous sommes heureux de vous assister pour toutes vos questions.

* Champs obligatoires